Best Quality Huawei H35-561 Exam Questions PracticeVCE Realistic Practice Exams [2021]
Critical Information To HCIP-LTE-RNP&RNO V1.0 Pass the First Time
NEW QUESTION 20
The PCI plan is only for the same-frequency neighboring area. If it is an inter- frequency neighboring area, you can use the same PCI directly without considering the PCI planning.
- A. True
- B. False
Answer: A
NEW QUESTION 21
Which of the following descriptions of propagation loss are correct? (Multiple choice) Which of the following descriptions of propagation loss are correct?
- A. Street brackets with aluminum brackets produce less attenuation than brackets without aluminum
- B. The loss in the window area is generally smaller than the loss in the window area.
- C. The loss of open space in the building is less than the loss of the wall area with the corridor
- D. The average penetration loss of buildings located in urban areas is greater than that of suburban and remote areas.
Answer: B,C,D
NEW QUESTION 22
RB is the smallest resource granularity in the LTE system.
- A. True
- B. False
Answer: B
NEW QUESTION 23
If a single format Preamble is used in the entire network, the Preamble transmit power must be increased when the cell radius is small, which puts higher requirements on the design of E itself; when the cell radius is large, the long Preamb1e sequence increases the complexity of network test detection and affects the overall network efficiency.
- A. True
- B. False
Answer: B
NEW QUESTION 24
Regarding the format of the LTE randomly accessing preamble, which of the following are correct? (Multiple Choice)
- A. Format 4 can only be used for TD cells
- B. Format 0 - 3 can be user FDD cell, or user TDm cell
- C. Format 0 - 3 can only be used for FDD cells
- D. Format 4 can be used for TD cells and can also be used for FDD cells.
Answer: A,B
NEW QUESTION 25
When X2 handover cannot be performed between eNodeBs, S1 handover is performed.
- A. True
- B. False
Answer: A
NEW QUESTION 26
Regarding TA LIST, which are the correct descriptions of the following? (Multiple choice)
- A. When calling a UE in an idle state, paging may be performed on all TA in a TA list or may be paged in a partial TA in the TA list according to some optimization algorithms.
- B. TA List cannot span the MME and S-GW service range currently selected by the UE.
- C. MME for the UE allocated TA List maximum can be contained in the TA number, the terminal is capable of storing a maximum number of 16th
- D. The UE is not allowed to initiate the TAU process when moving within the TA List.
Answer: A,B,C
NEW QUESTION 27
At present, it is recommended to share the APN with voice and data, and the data adopts the default bearer. The signaling and media of VoLTE adopt a proprietary bearer and have higher QoS guarantee.
- A. True
- B. False
Answer: B
NEW QUESTION 28
How many configurations are there for R8 TDD special subframe configuration?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 29
Which of the following transmission modes does the RLC layer support? (Multiple Choice)
- A. AM
- B. UM
- C. TM
- D. CM
Answer: A,B,C,D
NEW QUESTION 30
What are the possible reasons for switching too early? (Multiple Choice)
- A. Source cell handover decision threshold is too low
- B. The target cell has high reference signal strength, but the channel quality is poor.
- C. The source cell handover decision timer is too long.
- D. Target side resource congestion
Answer: A,B
NEW QUESTION 31
Which of the following downlink physical channels are used to carry HARQ information?
- A. PDCCH
- B. PBCH
- C. PCFICH
- D. PHICH
Answer: D
NEW QUESTION 32
In LTE, if the RRC reconfiguration message includes the mobilityControlInfo IE, what is the main function of the IE?
- A. Establish, modify, and release measurements
- B. Establish, modify, and release wireless bearers
- C. Perform switching
- D. NAS information transfer
Answer: C
NEW QUESTION 33
During the RRC establishment process, the MME needs to allocate a C-RNTI to the UE.
- A. True
- B. False
Answer: B
NEW QUESTION 34
Which of the following release cause values will be counted as E-RAB abnormal release?
- A. UE Not Available for PS Service
- B. Inter-RAT Redirection
- C. Unspecified
- D. Om-Intervention
Answer: C
NEW QUESTION 35
Which of the following options can improve the VOLTE uplink coverage technology? (Multiple Choice)
- A. RLC segmentation
- B. TTI bundling
- C. ROHC
- D. Semi-static scheduling
Answer: A,B,C,D
NEW QUESTION 36
About the description of the gateway selection in EPC, which of the following are ? (Multiple Choice)
- A. In the process of Attach, select S-GW using the DNS parse function based on TAI
- B. MME select S-GW according to the UE's current TAI
- C. Should try to choose the P-GW unity with the selected S-GW
- D. If UEA activates multiple PDN connections to a APN, these PDN connections can choose different PGW
Answer: A,B,C
NEW QUESTION 37
In the switch measurement configuration message, which one is not included in the measured object?
- A. Measuring bandwidth
- B. Measurement duration
- C. Target system
- D. Measurement frequency
Answer: B
NEW QUESTION 38
Which of the following parameters is not used for different system cell reselection control?
- A. sNonintraSearch
- B. ThreshXLow
- C. sIntraSearch
- D. ThreshXHigh
Answer: C
NEW QUESTION 39
Which of the data does not need to be collected when troubleshooting the RRC connection success rate?
- A. Antenna model
- B. Problem cell history alarm and current status
- C. Cell carrier performance statistics
- D. UE call failure CallTrace signaling tracking
Answer: A
NEW QUESTION 40
Which of the following is a UPEUc output power and 2 piece of UPEU output power in current mode?
- A. 360w/650w
- B. 360w/360w
- C. 300w/600w
- D. 300w/360w
Answer: A,D
NEW QUESTION 41
During the S1 interface switching and X2 interface switching process, the switching preparation phase is not completed. If there is a conflict between the switching and the CSFB process, which of the following will occur?
- A. The source cell performs handover preferentially, and the source cell rejects the CSFB request and sends an ESR REJECT message.
- B. The source cell preferentially executes CSFB, and the source cell cancels the handover and sends a HANDOVER CANCEL message.
- C. The source cell preferentially performs handover, and the source cell forwards the CSFB request indicator to the target cell.
- D. The source cell preferentially executes CSFB, the source cell suspends the handover and sends a HANDOVER SUSPEND message.
Answer: B
NEW QUESTION 42
......
H35-561 EXAM DUMPS WITH GUARANTEED SUCCESS: https://vce4exams.practicevce.com/Huawei/H35-561-practice-exam-dumps.html