Guide (New 2026) Actual Cisco 300-610 Exam Questions
300-610 Exam Dumps Pass with Updated 2026 Certified Exam Questions
Why is the Cisco 300-610 Exam important?
As a matter of fact, we do. And you can too if you pass your Cisco 300-610 Exam and get certified. Why is the Cisco 300-610 Exam important? We live in an Information Technology world. Everything is IT these days; from smartphones to supercomputers, robots to medical devices, and even automobiles are controlled via some form of a computerized system. The demand for IT professionals is greater than ever before. With the increased demand comes to a greater need for qualified IT professionals to fill the positions, and the Cisco 300-610 Exam is one of the keys to those positions. Utilizing the benefit of examinations to scores the guidance.
There are many different types of Cisco certifications available and each one is geared towards a specific field within Information Technology. Some of these specialties may appeal more to you than others, but regardless of which one you choose, you will want to take the steps necessary to earn the certification that applies to that field. Advising frame to certify the card redeem. Earning a certification will help open doors for you in the world of IT and make you more attractive to potential employers. These certifications will also help increase your credibility as an IT professional and allow you to command higher salaries than those who have not earned any certification or have earned a lesser certification than you have.
NEW QUESTION # 26
A network consultant evaluates the Cisco UCS Fabric Interconnect SAN configuration, which must meet these requirements:
All traffic must pass over the upstream device for switching and domain IDs must be preserved in the fabric.
Each server should be pinned to one designated upstream interface and for the traffic to pass through the pinned port.
Which Fabric Interconnect SAN operational mode meets these requirements?
- A. Fibre Channel
- B. NPIV
- C. switch
- D. end host
Answer: C
NEW QUESTION # 27
An engineer must implement an iSCSI storage connectivity in the existing Cisco UCS environment. The environment is based on Cisco UCS C-Series rack server, Cisco Nexus 1000V Series Switches, and VMware ESXi hosts. The implementation must meet these requirements:
Provide multipathing and high availability in the event of a critical path failure.
Be cost-effective and not require the purchase of new equipment.
Which two components must be selected to meet these requirements? (Choose two.)
- A. uplink pinning
- B. system VLAN
- C. hardware iSCSI NIC
- D. storage binding
- E. software iSCSI adapter
Answer: D,E
NEW QUESTION # 28
A network engineer needs to design Layer 2 connectivity for a subnet between two data centers using VXLAN with Cisco Nexus switches. The engineer must ensure seamless host mobility and optimal first-hop routing. Which gateway MAC attribute must be synchronized across both data centers?
- A. HSRP
- B. VRRP
- C. anycast
- D. multicast
Answer: C
NEW QUESTION # 29
A company must integrate an iSCSI storage solution into its existing production environment. The new iSCSI network must be accessible from a limited set of network segments. The client devices follow a strict network security policy to access critical data from the storage array.
Which design steps must be used to meet these requirements?
- A. Deploy the iSCSI storage appliance on the core switch in a separate VRF.
Apply the session mutual authentication (CHAP) method between the targets and initiators. - B. Connect the iSCSI storage appliance on the core switch in vPC mode.
Configure a token-based authentication between the storage array and the clients. - C. Connect the iSCSI storage appliance on the core switch using a dedicated port.
Apply the session mutual authentication (CHAP) method between the targets and initiators. - D. Place the iSCSI storage appliance on the core switch to isolate it in a private VLAN.
Configure a token-based authentication between the storage array and the clients.
Answer: A
NEW QUESTION # 30
An engineer needs an orchestration and monitoring tool that should be used for managing the storage networks and VXLAN fabrics. The tool should also allow support built-in dashboard and real-time health summary for managed devices. Which tool meets these requirements?
- A. Puppet
- B. Cisco Intersight
- C. Cisco DCNM
- D. Ansible
Answer: C
NEW QUESTION # 31
Which Cisco HyperFlex feature provides virtual machine cost scaling for desktop virtualization growth?
- A. HyperFlex Edge support
- B. Fabric Interconnects
- C. dedicated compute cards
- D. encryption offload cards
Answer: A
NEW QUESTION # 32
Which feature must be configured to connect a classical Ethernet network to a data center network so that the data center network appears to be one large switch.
- A. UDLD
- B. EVPN
- C. OSPF
- D. VPC+
Answer: B
Explanation:
A vPC allows links that are physically connected to two different Nexus switches to appear as single portchannel to a server or another switch.
NEW QUESTION # 33
An engineer is designing a Multichassis EtherChannel topology in which two switches must appear as a single device to a third downstream switch? Which two technologies meet this requirement? (Choose two.)
- A. HSRP
- B. VSS
- C. FEX
- D. vPC
- E. 802.1q
Answer: B,D
NEW QUESTION # 34
Drag and drop the Cisco Nexus 7000 Series Switch resources from the left onto the correct groups on the right.
Answer:
Explanation:
NEW QUESTION # 35
An engineer must design a secondary site to prevent a catastrophic primary site failure. The applications must communicate across sites via the data link layer of the OSI model. The Layer 3 transport that is available for this solution consists of 10-Gb connections over Layer 3.
Which two solutions meet these requirements? (Choose two.)
- A. OTV
- B. OSPF
- C. VXLANEVPN
- D. ISIS
- E. vPC
Answer: A,C
NEW QUESTION # 36
A storage administrator receives reports of network delays when database software attempts to access the storage array.
The virtual machines that host the database software are installed on different rack servers connected to the Cisco UCS Fabric Interconnect domain. The existing SAN switches are connected to the Fabric Interconnects using two 8 Gb port-channel interfaces to connect the storage array. The storage administrator has decided to deploy iSCSI storage with four 10 Gbps interfaces connected to the Cisco UCS Fabric Interconnects.
Which deployment type resolves the problems with storage contention?
- A. iSCSI storage with Cisco UCS Fabric Interconnect using an appliance port
- B. iSCSI storage with Cisco UCS Fabric Interconnect in the virtual port-channel mode
- C. iSCSI storage appliance on Cisco UCS Fabric Interconnect uplink trunk port
- D. iSCSI storage appliance on Cisco UCS Fabric Interconnect in the storage end-host mode
Answer: C
NEW QUESTION # 37
An engineer installs a B-Series server in a Cisco UCS chassis that contains a pair of UCS-IOM-2208XP I/O modules. The full bandwidth of the I/O module must be utilized.
Which two elements should be used in this environment? (Choose two.)
- A. Cisco UCS VIC 1280
- B. Cisco UCS M81KR
- C. four twinax cables from each I/O module to each fabric interconnect
- D. Cisco UCS VIC 1225
- E. eight twinax cables from each I/O module to each fabric interconnect
Answer: A,E
NEW QUESTION # 38
What is an advantage of using OTV as compared to VPLS for data center redundancy?
- A. uses a proactive MAC advertisement
- B. prevents loops on point-to-point links
- C. provides head-end replication
- D. provides full-mesh connectivity
Answer: B
Explanation:
Reference: https://community.cisco.com/t5/data-center-documents/understanding-overlay-transport- virtualization-otv/ta-p/3151502#toc-hId-1043251551
NEW QUESTION # 39
Refer to the exhibit. An engineer needs a solution to extend Fibre Channel traffic between multiple sites. The IPsec tunnels must be used to encrypt and secure the traffic. Which technology must be selected to meet these requirements?
- A. iSCSI
- B. VXLAN
- C. FCoE
- D. FCIP
Answer: D
NEW QUESTION # 40
Drag and drop the data center technologies from the left onto the correct descriptions on the right. Not all technologies are used.
Answer:
Explanation:
NEW QUESTION # 41
Drag and drop the data center technologies from the left onto the correct descriptions on the right. Not all technologies are used.
Answer:
Explanation:
NEW QUESTION # 42
A engineer wants to eliminate the manual process of checking the system hardware and firmware against a specified hardware compatibility tool. The tool must be able to manage an extensive list of devices including cisco HyperFlex, MDS, and Nexus switches. The tool must manage hardware in multiple data centers so it should be deployed on public cloud infrastructure. Which tool meets these requirements?
- A. Cisco data center network manager
- B. Cisco UCS director
- C. Cisco intersight
- D. Cisco tetration
Answer: C
NEW QUESTION # 43
An engineer must develop a Python tool to automate software upgrades of both data center and non-data center devices. All devices offer a RESTful API and require a JSON or XML payload Vendor-specific libraries must be avoided. Which library must the engineer choose?
- A. ncciient
- B. Nornir
- C. requests
- D. Netmiko
Answer: C
NEW QUESTION # 44
A data center with over 4000 VLANs must be stretched to a disaster recovery site. The solution must support the migration of virtual machines to a disaster recovery site. To support the scalability of the solution, the internal fabric of the main site must be from the DCI network. The connecting network infrastructure uses a 10 Gbps link with PIM ASM supported, which will be replaced with a different overlay in the next 12 months. The solution must support head-end replication for broadcast, unknown unicast, and multicast traffic. Which solution must be used to meet these requirements?
- A. VXLAN Multi-Site
- B. OTV
- C. MPLS over GRE
- D. LISP
Answer: A
NEW QUESTION # 45
Refer to the exhibit. An engineer builds a data center network design using EVPN technology.
Within the design, the fabric acts as a gateway. Traffic from host X to host Y must pass through the Cisco ASA firewall for deep packet inspection and increased security. Which firewall deployment must the engineer choose to accomplish this goal?
- A. routed mode
- B. VLAN stitching
- C. service graph
- D. VRF sandwich
Answer: A
NEW QUESTION # 46
Which orchestration tool must be used to manage VXLAN fabrics and includes a built-in dashboard and d real-time network health summary for managed devices?
- A. Puppet
- B. Cisco Intersight
- C. Cisco Nexus Dashboard Fabric Controller
- D. Ansible
Answer: C
NEW QUESTION # 47
A network engineer must design a high-performance, lossless Ethernet network to support AI workloads in a data center. The network uses a spine-leaf topology with Cisco Nexus 9000 Series Switches. The design must ensure that critical AI traffic can move seamlessly across the fabric without being dropped due to congestion.
The design requirements are:
* Prevent packet drops for high-priority AI traffic flows.
* Proactively manage and signal congestion to ensure continuous data flow even under heavy load.
Which design approach must be used to meet these requirements?
- A. Use ECN across the network to manage congestion. Adjust the TCP settings for AI workload resilience.
- B. Enable PFC across all QoS classes. Tune buffer at the spine layer for AI traffic congestion.
- C. Implement PFC only on high-priority traffic. Configure ECN across both spine and leaf switches.
- D. Configure PFC on all traffic classes across the spine-leaf topology. Enable ECN only on the leaf switches.
Answer: C
NEW QUESTION # 48
......
Pass Guaranteed Quiz 2026 Realistic Verified Free Cisco: https://vce4exams.practicevce.com/Cisco/300-610-practice-exam-dumps.html