Download Latest 350-401 Dumps with Authentic Real Exam Questions
Authentic 350-401 Exam Dumps PDF - Nov-2024 Updated
Cisco 350-401 ENCOR exam covers a range of topics, including network architecture, infrastructure, security, automation, and network assurance. Candidates must demonstrate their knowledge of the latest networking technologies, including Cisco DNA Center, virtualization technologies, and network automation tools. 350-401 exam also covers the latest security technologies, including network security, endpoint security, and security automation.
NEW QUESTION # 648
What is used to perform OoS packet classification?
- A. the Type field in the Layer 2 frame
- B. the Options field in the Layer 3 header
- C. the TOS field in the Layer 3 header
- D. the Flags field in the Layer 3 header
Answer: C
NEW QUESTION # 649
Refer to the exhibit.
The IP SLA is configured in a router. An engineer must configure an EEM applet to shut down the interface and bring it back up when there is a problem with the IP SLA. Which configuration should the engineer use?
- A. event manager applet EEM_IP_SLA
event sla 10 state unreachable - B. event manager applet EEM_IP_SLA
event sla 10 state down - C. event manager applet EEM_IP_SLA
event track 10 state unreachable - D. event manager applet EEM_IP_SLA
event track 10 state down
Answer: C
NEW QUESTION # 650
Which two operations are valid for RESTCONF? (Choose two.)
- A. PUSH
- B. PATCH
- C. REMOVE
- D. ADD
- E. HEAD
- F. PULL
Answer: B,C
NEW QUESTION # 651
Which method displays text directly into the active console with a synchronous EEM applet policy?
- A. event manager applet boom
event syslog pattern 'UP'
action 1.0 string 'logging directly to console' - B. event manager applet boom
event syslog pattern 'UP'
action 1.0 gets 'logging directly to console' - C. event manager applet boom
event syslog pattern 'UP'
action 1.0 syslog priority direct msg 'log directly to console' - D. event manager applet boom
event syslog pattern 'UP'
action 1.0 puts 'logging directly to console'
Answer: C
Explanation:
Explanation
To enable the action of printing data directly to the local tty when an Embedded Event Manager (EEM) applet is triggered, use the action puts command in applet configuration mode.
The following example shows how to print data directly to the local tty:
The action puts command applies to synchronous events. The output of this command for a synchronous applet is directly displayed to the tty, bypassing the syslog.
Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/eem/command/eem-cr-book/eemcr- a1.html
NEW QUESTION # 652
Which two operations are valid for RESTCONF? (Choose two.)
- A. PUSH
- B. REMOVE
- C. PATCH
- D. ADD
- E. PULL
- F. HEAD
Answer: C,F
Explanation:
Reference:
RESTCONF operations include OPTIONS, HEAD, GET, POST, PATCH, DELETE.
NEW QUESTION # 653
Drag and drop the characteristics from the left onto the orchestration tools that they describe on the right.
Answer:
Explanation:
NEW QUESTION # 654
Drag and drop the virtual components from the left onto their deceptions on the right.
Answer:
Explanation:
NEW QUESTION # 655
Refer to the exhibit.
The inside and outside interfaces u configuration of this device have been correctly identified. What is the effect of this configuration?
- A. NAT64
- B. PAT
- C. dynamic NAT
- D. static NAT
Answer: B
Explanation:
The configuration in the exhibit indicates the use of Port Address Translation (PAT). The "overload" keyword at the end of the NAT command signifies that multiple internal IP addresses will be translated to a single public IP address, with each session differentiated by a unique port number. This is a characteristic feature of PAT, which allows numerous devices on a local network to share a single public IP address while maintaining unique sessions. References: Implementing and Operating Cisco Service Provider Network Core Technologies source documents or study guide.
NEW QUESTION # 656
Which JSON syntax is valid?
A)
B)
C)
D)
- A. Option D
- B. Option C
- C. Option A
- D. Option B
Answer: B
Explanation:
Explanation
This JSON can be written as follows:
{
'switch': {
'name': 'dist1',
'interfaces': ['gig1', 'gig2', 'gig3']
}
}
NEW QUESTION # 657
An engineer runs the code against an API of Cisco DMA Center, and the platform returns this output What does the response indicate?
- A. The URl string is incorrect.
- B. The HTTP method is incorrect
- C. The authentication credentials are incorrect
- D. The Cisco DNA Center API port is incorrect
Answer: B
Explanation:
he output indicates that the HTTP method used in the API request is not supported by the Cisco DNA Center's API endpoint. This is typically the case when the endpoint expects a different type of request method, such as GET, POST, PUT, or DELETE, and the one used is not correct for the intended operation.
References: The Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) course
https://developer.mozilla.org/en-US/docs/Web/HTTP/Status
NEW QUESTION # 658
Drag and drop the descriptions from the left onto the QoS components on the right.
Answer:
Explanation:
Explanation
The cool thing about shaping is that all traffic will be sent since we are buffering it. The downside of buffering traffic is that it introduces delay and jitter. Let me show you an example:
NEW QUESTION # 659 
Refer to the exhibit. An engineer configures CoPP and enters the show command to verify the implementation.
What is the result of the configuration?
- A. Class-default traffic will be dropped.
- B. ICMP will be denied based on this configuration.
- C. All traffic will be policed based on access-list 120.
- D. If traffic exceeds the specified rate, it will be transmitted and remarked.
Answer: C
NEW QUESTION # 660
What is one benefit of adopting a data modeling language?
- A. deploying machine-friendly codes to manage a high number of devices
- B. augmenting management process using vendor centric actions around models
- C. refactoring vendor and platform specific configurations with widely compatible configurations
- D. augmenting the use of management protocols like SNMP for status subscriptions
Answer: C
Explanation:
Adopting a data modeling language like YANG provides a standardized data structure, which results in configuration scalability and consistency across different vendor and platform configurations. This standardization allows for the refactoring of vendor and platform-specific configurations into widely compatible configurations, facilitating easier management and automation of network devices.
NEW QUESTION # 661
Drag and drop the LISP components on the left to their descriptions on the right. Not all options are used.
Answer:
Explanation:
NEW QUESTION # 662
What is one fact about Cisco SD-Access wireless network deployments?
- A. The access point is part the fabric overlay
- B. The WLC is part of the fabric underlay
- C. The wireless client is part of the fabric overlay
- D. The access point is part of the fabric underlay
Answer: A
Explanation:
Explanation
Access Points
+ AP is directly connected to FE (or to an extended node switch)
+ AP is part of Fabric overlay
Reference: https://www.ciscolive.com/c/dam/r/ciscolive/us/docs/2018/pdf/BRKEWN-2020.pdf
NEW QUESTION # 663
Drag the characteristics from the left onto the routing protocols they describe on the right.
Answer:
Explanation:
NEW QUESTION # 664
Drag and drop the descriptions from the left onto the QoS components on the right.
Answer:
Explanation:
NEW QUESTION # 665
Refer to the exhibit. An engineer must establish eBGP peering between router R3 and router R4.
Both routers should use their loopback interfaces as the BGP router ID.
Which configuration set accomplishes this task?
- A. R3(config)#router bgp 200
R3(config-router)#neighbor 10.24.24.4 remote-as 100
R3(config-router)#bgp router-id 10.3.3.3
R4(config)#router bgp 100
R4(config-router)#neighbor 10.24.24.3 remote-as 200
R4(config-router)#bgp router-id 10.4.4.4 - B. R3(config)#router bgp 200
R3(config-router)#neighbor 10.24.24.4 remote-as 100
R3(config-router)#neighbor 10.24.24.4 update-source loopback0
R4(config)#router bgp 100
R4(config-router)#neighbor 10.24.24.3 remote-as 200
R4(config-router)#neighbor 10.24.24.3 update-source loopback0 - C. R3(config)#router bgp 200
R3(config-router)#neighbor 10.4.4.4 remote-as 100
R3(config-router)#neighbor 10.4.4.4 update-source loopback0
R4(config)#router bgp 100
R4(config-router)#neighbor 10.3.3.3 remote-as 200
R4(config-router)#neighbor 10.3.3.3 update-source loopback0
Answer: A
NEW QUESTION # 666
How does EIGRP differ from OSPF?
- A. EIGRP has a full map of the topology, and OSPF only knows directly connected neighbors
- B. EIGRP is more prone to routing loops than OSPF
- C. EIGRP uses more CPU and memory than OSPF
- D. EIGRP supports equal or unequal path cost, and OSPF supports only equal path cost.
Answer: B
NEW QUESTION # 667
Which unit of measure is used to measure wireless RF SNR?
- A. mW
- B. dBi
- C. dBm
- D. dB
Answer: C
NEW QUESTION # 668
Which two methods are used to reduce the AP coverage area? (Choose two.)
- A. Increase minimum mandatory data rate
- B. Disable 2.4 GHz and use only 5 GHz.
- C. Enable Fastlane.
- D. Reduce channel width from 40 MHz to 20 MHz
- E. Reduce AP transmit power
Answer: D,E
NEW QUESTION # 669 
Refer to the exhibit. What does the Python code accomplish?
- A. It generates a status code of 403 because the type is incorrect.
- B. It returns data in JSON-RPC format.
- C. It configures interface e1/32 to be in an err-disable state
- D. It configures interface e1/32 to be in an admin down state
Answer: D
NEW QUESTION # 670
Drag and drop the characteristics from the left onto the appropriate infrastructure deployment types on the right.
Answer:
Explanation:
NEW QUESTION # 671 
Refer to the exhibit. An engineer configures CoPP and enters the show command to verify the implementation.
What is the result of the configuration?
- A. Class-default traffic will be dropped.
- B. ICMP will be denied based on this configuration.
- C. All traffic will be policed based on access-list 120.
- D. If traffic exceeds the specified rate, it will be transmitted and remarked.
Answer: C
NEW QUESTION # 672
Refer to the exhibit.
Refer to the exhibit. An engineer is investigating why guest users are able to access other guest user devices when the users are connected to the customer guest WLAN. What action resolves this issue?
- A. implement Wi-Fi direct policy
- B. implement P2P blocking
- C. implement MFP client protection
- D. implement split tunneling
Answer: B
Explanation:
This control determines whether the Wireless LAN Controller is configured to prevent clients connected to the same Wireless Local Area Controller from communicating with each other.
Wireless Client Isolation prevents wireless clients from communicating with each other over the RF. Packets that arrive on the wireless interface are forwarded only out the wired interface of an Access Point. One wireless client could potentially compromise another client sharing the same wireless network.
NEW QUESTION # 673
......
Cisco 350-401 (Implementing Cisco Enterprise Network Core Technologies) Exam is a certification exam designed to test the knowledge and skills of IT professionals who work with Cisco enterprise network technologies. It is a part of the Cisco Certified Network Professional (CCNP) and Cisco Certified Specialist - Enterprise Core certifications. Passing 350-401 exam is a crucial step towards advancing one's career in the field of networking.
350-401 Dumps for success in Actual Exam: https://vce4exams.practicevce.com/Cisco/350-401-practice-exam-dumps.html