2022 Updated Verified 350-501 Q&As - Pass Guarantee or Full Refund
[Mar-2022] 350-501 Certification with Actual Questions from PracticeVCE
Certification Path
Cisco 350-501 is a comprehensive exam that will qualify you for as many as three certifications as already mentioned. So, the next path will largely depend on your current role. If you want to validate your service provide management skills at the intermediate level, you may first attain the CCNP Service Provider certificate. The next step is Cisco CCIE Service Provider. To attain this accreditation, get ready to ace the lab exam.
NEW QUESTION 130
You are writing an RPL scnpt to accept routes only from certain autonomous systems Consider this code.
If you apply this code to BGP filters, which effect does the code have on your router?
- A. allows routes from AS 770
- B. denies routes from AS 7007
- C. allows routes from AS 7077
- D. denies routes from AS 7070
Answer: C
NEW QUESTION 131
Refer to the exhibit.
The network engineer who manages ASN 65010 is provisioning a customer VRF named CUSTOMER-ABC on PE-2. The PE-CE routing protocol is OSPF Internet reachability is available via the OSPF 0 0 0.0/0 route advertised by CE-1 to PE-1 In the customer VRF Which configuration must the network engineer Implement on PE-2 so that CE-2 has connectivity to the Internet?
A)
B)
C)
D)
- A. Option C
- B. Option D
- C. Option B
- D. Option A
Answer: A
NEW QUESTION 132
An engineer working for telecommunication company with an employee id: 3715 15 021 needs to secure the LAN network using a prefix list Which best practice should the engineer follow when he implements a prefix list?
- A. An engineer must use non sequential sequence numbers in the prefix list so that he can insert additional entries later.
- B. An engineer must identity the prefix list with a number only
- C. An engineer must include only the prefixes for which he needs to log activity.
- D. The final entry in a prefix list must be /32
Answer: A
NEW QUESTION 133
Refer To the exhibit.
Which BGP attribute should be manipulated to have CE1 use PE1 as the primary path to the Internet?
- A. The MED should be manipulated on CE1 on inbound routes from PE1.
- B. The local preference attribute should be manipulated on PE2 on inbound routes advertised to CE1.
- C. The weight attribute should be manipulated on PE1 on outbound routes advertised to CE1.
- D. The origin of all routes should be modified on each router on inbound and outbound routes advertised to CE1.
Answer: D
NEW QUESTION 134
ASN 65001 is peering with ASN 65002 to exchange IPv6 BGP routes. All routes that originate in ASN 65001 have a standard community value of 65001:100, and ASN 65002 is allowed to advertise only
2001:db8:aaaa::/48. An engineer needs to update the ASN 65001 route-filtering configuration to meet these conditions:
* Looped routes into ASN 65001 and routes that have traversed 10 or more ASNs must be denied.
* Routes accepted into ASN 65001 must be assigned a community value of 65001:200.
Which configuration must be engineer apply to the ASN 65001 border router?
- A.
- B.
- C.
- D.
Answer: D
Explanation:
Section: Networking
NEW QUESTION 135
You are creating new Cisco MPLS TE tunnels. Which type of RSVP message does the headend router send to reserve bandwidth on the path to the tunnel's router?
- A. path
- B. error
- C. reservation
- D. tear
Answer: C
NEW QUESTION 136
Refer to the exhibit.
Router 4 is added to the network and must be in the same area as router 1. Which NET should the engineer assign?
- A. 49.0011.0000.0000.0002.00
- B. 49.0011.0000.0000.0003.00
- C. 49.0001.0000.0000.0004.00
- D. 49.0111.0000.0000.0001.00
Answer: B
NEW QUESTION 137
Drag and drop the LDP features from the left onto the correct usages on the right.
Answer:
Explanation:
NEW QUESTION 138
Refer to the exhibit.
An engineer is configuring an administrative domain in the given multi-vendor environment with PIM-SM.
Which feature must the engineer implement so that devices will dynamically learn the RP?
- A. Auto-RP
- B. SSM
- C. BSR
- D. BIDIR-PIM
Answer: A
NEW QUESTION 139
Refer to the exhibit.
To protect in-band management access to CPE-R7, an engineer wants to allow only SSH management and provisioning traffic from management network 192.168.0.0/16. Which infrastructure ACL change must be applied to router PE-R9 to complete this task?
A)
B)
D)
- A. Option B
- B. Option D
- C. Option C
- D. Option A
Answer: A
NEW QUESTION 140
Refer to the exhibit:
This configuration is being applied on an IOS XR router.
Which statement about this configuration is true?
- A. It is used to identify traps for SNMP polling
- B. It is used to create a subscription to specify the streaming interval
- C. It is used to identify MIB entries and has a list of YANG models
- D. It is used to create a sensor-group and has a list of YANG models for streaming
Answer: B
NEW QUESTION 141
Drag and drop the OSs from the left onto the correct deceptions on the right.
Answer:
Explanation:
NEW QUESTION 142 
Refer to the exhibit Which effect of this configuration is true?
- A. The two routers fail to form a neighbor relationship because the authentication configuration is missing.
- B. The two routers fail to form a neighbor relationship because their system IDs are different.
- C. The two routers fail to form a neighbor relationship because they have different IS-IS area types.
- D. The two routers successfully form a neighbor relationship.
Answer: D
Explanation:
Section: Networking
NEW QUESTION 143
Refer to the exhibit.
An engineer must configure router R2 as the new P router in the network. Which configuration must be applied to R2 to enable LDP-IGP Sync on its L2 IS-IS adjacencies?
- A. Option C
- B. Option B
- C. Option A
- D. Option D
Answer: D
NEW QUESTION 144
Refer to the exhibit:
Which purpose of implementing NSF with this configuration is true?
- A. The router uses NSF to load balance traffic between two links, with the primary link alternating every
90 seconds - B. The router uses NSF to handle RP switchover while allowing neighbor relationships to remain up
- C. The router uses NSF to load balance traffic on a routed EtherChannel
- D. The router uses NSF to reduce neighbor-relationship downtime during RP switchover
Answer: B
NEW QUESTION 145
Refer to the exhibit. ISP ASN 65100 provides internet services to router CE-1 and receives customer prefix 198.18 18.0/24 via EBGP. An administrator for the ISP Is now provisioning RTBH services to provide on-demand data-plane security for the customer s IP space. Which route-map configuration must the administrator apply to router RTBH-1 to complete the implementation of RTBH services to CE-1?
- A. Option D
- B. Option C
- C. Option B
- D. Option A
Answer: D
NEW QUESTION 146
An network engineer is deploying VRF on ASBR router R1. The interface must have connectivity over an MPLS VPN inter-AS Option AB network. Which configuration must the engineer apply on the router to accomplish this task?
A)
B)
C)
D)
- A. Option C
- B. Option B
- C. Option A
- D. Option D
Answer: D
NEW QUESTION 147
Refer to the exhibit:
What does this value mean when it is received in XML?
- A. It indicates a value assigned by a network administrator to tag a route
- B. It means a data fie4d is blank
- C. It shows the ending of the script
- D. It indicates a break in a sequence
Answer: B
NEW QUESTION 148
Refer to the exhibit:
In which way does router R1 operate differently than router R2?
- A. R1 sends LSA types 1 and 2, while R2 sends type 1. 2. and 7 LSAs
- B. R1 sends LSA type 2 only and R2 sends LSA type 1 only
- C. R1 sends LSA types 5 and 7, while R2 sends type 1, 2, and 7 LSAs
- D. R1 sends LSA type 2 only, while R2 sends type 1 and type 7 LSAs
Answer: A
NEW QUESTION 149
Refer to the exhibit:
Which statement describes the effect of this configuration?
- A. It applies a service policy to all interfaces remarking HTTP traffic
- B. It modifies the default policy map to allow all HTTP traffic through the router
- C. It creates an ACL named WEB that filters HTTP traffic.
- D. It matches HTTP traffic for use in a policy map
Answer: D
NEW QUESTION 150
Refer to the exhibit.
An engineer applied a gRPC dial-in configuration on customer's router to provide connection multiplexing and two-way streaming. What does this configuration accomplish in a gRPC?
- A. It is the encoding requested by the gRPC server.
- B. It is used for encoding with the default protocol buffers
- C. It is the encoding requested by the gRPC client.
- D. IT is the encoding that is used for dial-in and dial-out.
Answer: A
NEW QUESTION 151
An engineer working for a private telecommunication company with an employe id:3948:613 needs to limit the malicious traffic on their network. Which configuration must the engineer use to implement URPF loose mode on the GigabitEthernet0/1 interface?
A)
B)
C)
D)
- A. Option D
- B. Option C
- C. Option B
- D. Option A
Answer: D
Explanation:
"reachable-via any" must be configured for Loose mode on both IPv4 & IPv6.
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_data_urpf/configuration/xe-3s/sec-data-urpf-xe-3s-book/sec-unicast-rpf-loose-mode.html
NEW QUESTION 152
While implementing TTL security, you issue the PE(config-router-af)#neighbor 2.2.2.2 ttl-security hops 2 command.
After you issue this command, which BGP packets does the PE accept?
- A. from 2.2.2.2, with a TTL of 253 or more
- B. to 2.2.2.2, with a TTL of 2 or more
- C. to 2.2.2.2, with a TTL of less than 253
- D. from 2.2.2.2, with a TTL of less than 2
Answer: A
NEW QUESTION 153
Refer to the exhibit:
In which way does router R1 operate differently than router R2?
- A. R1 sends LSA types 1 and 2, while R2 sends type 1. 2. and 7 LSAs
- B. R1 sends LSA type 2 only and R2 sends LSA type 1 only
- C. R1 sends LSA types 5 and 7, while R2 sends type 1, 2, and 7 LSAs
- D. R1 sends LSA type 2 only, while R2 sends type 1 and type 7 LSAs
Answer: A
NEW QUESTION 154
Which two features will be used when defining SR-TE explicit path hops if the devices are using IP unnumbered interfaces? (Choose two.)
- A. output interface
- B. labels
- C. router ID
- D. next hop address
- E. node address
Answer: B,E
NEW QUESTION 155
......
350-501 Real Valid Brain Dumps With 283 Questions: https://vce4exams.practicevce.com/Cisco/350-501-practice-exam-dumps.html