Fair pricing and solid quality are not opposites — a well-run question bank can offer both. PracticeVCE proves that with the VMware Advanced Deploy VMware NSX-T Data Center 3.X package: 16 verified practice questions at a price kept reasonable on purpose.
VMware 3V0-41.22 Exam Syllabus Topics:
| Section | Objectives |
|---|---|
| NSX-T Logical Routing | - Routing protocols and route redistribution - Tier-0 and Tier-1 gateway configuration |
| Load Balancing | - NSX Advanced Load Balancer concepts - Virtual service configuration |
| NSX-T Security | - Micro-segmentation policies - Identity and security groups - Distributed firewall configuration |
| Troubleshooting and Operations | - Monitoring NSX-T components - Packet capture and diagnostics - Common configuration issue resolution |
| NSX-T Logical Switching | - Segments and logical switches configuration - VLAN and overlay networking integration |
| NSX Edge Services | - North-South connectivity setup - Edge node deployment and configuration |
| Install, Configure, and Upgrade NSX-T Data Center | - Cluster preparation and transport node configuration - NSX-T architecture and components deployment - Upgrade procedures and lifecycle management |
3V0-41.22 Study Material: Answers
Each round of the 3V0-41.22 question bank starts from the official exam objectives: experts map the syllabus, draft questions to cover it with precision, and review the result before release. When new exam points appear, the bank is updated accordingly — deliberate coverage, not guesswork.
Any details you leave with us during browsing or purchase are guarded against misuse and external threats, and they are used only to deliver your order and support. Your 3V0-41.22 purchase stays between you and us — that is a standing commitment, not a marketing line.
Recommended prerequisite: VMware Certified Professional - Network Virtualization (VCP-NV) or equivalent NSX-T experience
You can confirm the current eligibility requirements on the official 3V0-41.22 exam page before you register.
Many candidates combine practice questions with official training. Recommended options include:
This package includes 16 practice questions for the VMware Advanced Deploy VMware NSX-T Data Center 3.X exam. Every answer is verified by an experienced team of experts, so you can trust what you study.
You can register for the VMware Advanced Deploy VMware NSX-T Data Center 3.X exam through the official channels:
The VMware Advanced Deploy VMware NSX-T Data Center 3.X practice questions are organized around the official exam objectives. Key topics include:
- NSX-T Logical Routing ()
- NSX-T Security ()
- Install, Configure, and Upgrade NSX-T Data Center ()
Syllabus-driven coverage means no wasted practice on irrelevant material.
VMware Advanced Deploy VMware NSX-T Data Center 3.X Sample Questions:
SIMULATION
Task 2
You are asked to deploy three Layer 2 overlay-backed segments to support a new 3-tier app and one Layer 2 VLAN-backed segment for support of a legacy application. The logical segments must block Server DHCP requests. Ensure three new overlay-backed segments and one new VLAN-backed logical segment are deployed to the RegionA01-COPMOI compute cluster. All configuration should be done utilizing the NSX UI.
You need to:
Complete the requested task.
Notes: Passwords are contained in the user_readme.txt. Task 2 is dependent on the completion of Task 1. Other tasks are dependent on completion of this task. You may want to move to the next tasks while waiting for configuration changes to be applied. This task should take approximately 10 minutes to complete.
Correct Answer:
See the Explanation part of the Complete Solution and step by step instructions Explanation:
To deploy three layer 2 overlay-backed segments and one layer 2 VLAN-backed segment, you need to follow these steps:
Log in to the NSX Manager UI with admin credentials. The default URL is https://<nsx-manager-ip-address>.
Navigate to Networking > Segments and click Add Segment.
Enter a name for the segment, such as Web-01.
Select Tier-1 as the connectivity option and choose an existing tier-1 gateway from the drop-down menu or create a new one by clicking New Tier-1 Gateway.
Enter the gateway IP address of the subnet in a CIDR format, such as 192.168.10.1/24.
Select an overlay transport zone from the drop-down menu, such as Overlay-TZ.
Optionally, you can configure advanced settings such as DHCP, Metadata Proxy, MAC Discovery, or QoS for the segment by clicking Set Advanced Configs.
Click Save to create the segment.
Repeat steps 2 to 8 for the other two overlay-backed segments, such as App-01 and DB-01, with different subnet addresses, such as 192.168.20.1/24 and 192.168.30.1/24.
To create a VLAN-backed segment, click Add Segment again and enter a name for the segment, such as Legacy-01.
Select Tier-0 as the connectivity option and choose an existing tier-0 gateway from the drop-down menu or create a new one by clicking New Tier-0 Gateway.
Enter the gateway IP address of the subnet in a CIDR format, such as 10.10.10.1/24.
Select a VLAN transport zone from the drop-down menu, such as VLAN-TZ, and enter the VLAN ID for the segment, such as 100.
Optionally, you can configure advanced settings such as DHCP, Metadata Proxy, MAC Discovery, or QoS for the segment by clicking Set Advanced Configs.
Click Save to create the segment.
To apply a segment security profile to block DHCP requests on the segments, navigate to Networking > Segments > Segment Profiles and click Add Segment Profile.
Select Segment Security as the profile type and enter a name and an optional description for the profile.
Toggle the Server Block and Server Block - IPv6 buttons to enable DHCP filtering for both IPv4 and IPv6 traffic on the segments that use this profile.
Click Save to create the profile.
Navigate to Networking > Segments and select the segments that you want to apply the profile to.
Click Actions > Apply Profile and select the segment security profile that you created in step 18.
Click Apply to apply the profile to the selected segments.
You have successfully deployed three layer 2 overlay-backed segments and one layer 2 VLAN-backed segment with DHCP filtering using NSX-T Manager UI.
SIMULATION
Task 8
You are tasked With troubleshooting the NSX IPSec VPN service Which has been reported down. Verify the current NSX configuration is deployed and resolve any issues.
You need to:
* Verify the present configuration as provided below:
Complete the requested task.
Notes: Passwords are contained in the user_readme.txt. This task is not dependent on another. This task Should take approximately 15 minutes to complete.
Correct Answer:
See the Explanation part of the Complete Solution and step by step instructions Explanation:
To troubleshoot the NSX IPSec VPN service that has been reported down, you need to follow these steps:
Log in to the NSX Manager UI with admin credentials. The default URL is https://<nsx-manager-ip-address>.
Navigate to Networking > VPN > IPSec VPN and select the IPSec VPN session that is down. You can identify the session by its name, local endpoint, remote endpoint, and status.
Click Show IPSec Statistics and view the details of the IPSec VPN session failure. You can see the error message, the tunnel state, the IKE and ESP status, and the statistics of the traffic sent and received.
Compare the configuration details of the IPSec VPN session with the expected configuration as provided below. Check for any discrepancies or errors in the parameters such as local and remote endpoints, local and remote networks, IKE and ESP profiles, etc.
If you find any configuration errors, click Actions > Edit and modify the parameters accordingly. Click Save to apply the changes.
If you do not find any configuration errors, check the connectivity and firewall rules between the local and remote endpoints. You can use ping or traceroute commands from the NSX Edge CLI to test the connectivity. You can also use show service ipsec command to check the status of IPSec VPN service on the NSX Edge.
If you find any connectivity or firewall issues, resolve them by adjusting the network settings or firewall rules on the NSX Edge or the third-party device.
After resolving the issues, verify that the IPSec VPN session is up and running by refreshing the IPSec VPN page on the NSX Manager UI. You can also use show service ipsec sp and show service ipsec sa commands on the NSX Edge CLI to check the status of security policy and security association for the IPSec VPN session.
Viewing page 1 out of 8 pages.
Viewing questions 1-2 out of 16 questions.
662 Customer Reviews
